Streetwise Grab Guard 120M Volt Stun Gun

Most stun guns are vulnerable to one failure mode: being grabbed. If a threat grabs your stun gun before or during deployment, you've lost your tool and potentially handed it to them. The Grab Guard side plates turn that attempt into an immediate deterrent — any hand that closes around the head of the device receives a shock.

The 130 dB alarm is an underused layer in most stun gun designs. At 130 dB, the alarm is disorienting at close range and audible at significant distance. In public spaces — parking lots, transit stations, apartment hallways — the alarm draws attention before force is required. Many encounters end here.

The LED provides the scene-setting layer: light for identification, for dark environments, for signaling. Used first, the LED lets you assess a situation before escalating to alarm or stun.

The three-layer sequence (LED → alarm → stun) maps to real escalation: presence, then deterrence, then force. Each tool is available independently, not locked behind the others.

Yes — with the safety switch off during carry.

The on/off safety switch prevents activation from pocket or bag carry. Slide to ON only when ready to deploy.

Grab Guard note: The side plates are only active when the unit is armed. During carry with the safety switch in the OFF position, the side plates do not discharge.

Wrist strap note: Wearing the wrist strap provides additional retention against drop or snatch. Recommended for all active carry.

Charge for approximately 8 hours before first use. Avoid overcharging — unplug when fully charged.
Non-lethal. Temporary effects. Legal in most U.S. states — verify your local laws before carry. Keep out of reach of children.

1. Charge before first use. Connect the included charging cable to the USB port and charge for approximately 8 hours. The battery status indicator confirms charge level.
2. Holster or wrist strap for carry. Slide into the nylon holster and clip to a belt loop, or loop the wrist strap for active carry. Safety switch in the OFF position during carry.
3. LED first. Activate the LED to light the scene and identify threats before escalating.
4. Alarm if needed. If the situation requires immediate attention or deterrence, activate the 130 dB alarm. The sound is disorienting at close range and audible to bystanders.
5. Arm and deploy stun if escalation is unavoidable. Slide safety switch to ON. Press the stun activation button with the head of the device in contact with the target.
6. Create distance and call for help. The effect is temporary — use the window to move to safety.
Top off the battery weekly or when the status indicator shows low charge.

• Grab Guard stun gun
• Nylon holster
• Charging cable
• Instructions